# equinix\_network\_bgp (Resource) Resource `equinix_network_bgp` allows creation and management of Equinix Network Edge BGP peering configurations. ## Example Usage[​](#example-usage "Direct link to Example Usage") ``` # Create BGP peering configuration on a existing connection # between network device and service provider resource "equinix_network_bgp" "test" { connection_id = "54014acf-9730-4b55-a791-459283d05fb1" local_ip_address = "10.1.1.1/30" local_asn = 12345 remote_ip_address = "10.1.1.2" remote_asn = 66123 authentication_key = "secret" } ``` ## Argument Reference[​](#argument-reference "Direct link to Argument Reference") The following arguments are supported: * `connection_id` - (Required) identifier of a connection established between. network device and remote service provider that will be used for peering. * `local_ip_address` - (Required) IP address in CIDR format of a local device. * `local_asn` - (Required) Local ASN number. * `remote_ip_address` - (Required) IP address of remote peer. * `remote_asn` - (Required) Remote ASN number. * `authentication_key` - (Optional) shared key used for BGP peer authentication. ## Attributes Reference[​](#attributes-reference "Direct link to Attributes Reference") In addition to all arguments above, the following attributes are exported: * `uuid` - BGP peering configuration unique identifier. * `device_id` - unique identifier of a network device that is a local peer in a given BGP peering configuration. * `state` - BGP peer state, one of `Idle`, `Connect`, `Active`, `OpenSent`, `OpenConfirm`, `Established`. * `provisioning_status` - BGP peering configuration provisioning status, one of `PROVISIONING`, `PENDING_UPDATE`, `PROVISIONED`, `FAILED`. ## Import[​](#import "Direct link to Import") This resource can be imported using an existing ID: ``` terraform import equinix_network_bgp.example {existing_id} ```