# equinix\_network\_acl\_template (Resource) Resource `equinix_network_acl_template` allows creation and management of Equinix Network Edge device Access Control List templates. Device ACL templates give possibility to define set of rules will allowed inbound traffic. Templates can be assigned to the network devices. ## Example Usage[​](#example-usage "Direct link to Example Usage") ``` # Creates ACL template and assigns it to the network device resource "equinix_network_acl_template" "myacl" { name = "test" description = "Test ACL template" project_id = "a86d7112-d740-4758-9c9c-31e66373746b" inbound_rule { subnet = "1.1.1.1/32" protocol = "IP" src_port = "any" dst_port = "any" description = "inbound rule description" } inbound_rule { subnet = "172.16.25.0/24" protocol = "UDP" src_port = "any" dst_port = "53,1045,2041" } } ``` ## Argument Reference[​](#argument-reference "Direct link to Argument Reference") The following arguments are supported: * `name` - (Required) ACL template name. * `project_id` - (Optional) Unique Identifier for the project resource where the acl template is scoped to.If you leave it out, the ACL template will be created under the default project id of your organization. * `description` - (Optional) ACL template description, up to 200 characters. * `inbound_rule` - (Required) One or more rules to specify allowed inbound traffic. Rules are ordered, matching traffic rule stops processing subsequent ones. The `inbound_rule` block has below fields: * `subnet` - (Required) Inbound traffic source IP subnet in CIDR format. * `protocol` - (Required) Inbound traffic protocol. One of `IP`, `TCP`, `UDP`. * `src_port` - (Required) Inbound traffic source ports. Allowed values are a comma separated list of ports, e.g., `20,22,23`, port range, e.g., `1023-1040` or word `any`. * `dst_port` - (Required) Inbound traffic destination ports. Allowed values are a comma separated list of ports, e.g., `20,22,23`, port range, e.g., `1023-1040` or word `any`. * `description` - (Optional) Inbound rule description, up to 200 characters. ## Attributes Reference[​](#attributes-reference "Direct link to Attributes Reference") In addition to all arguments above, the following attributes are exported: * `uuid` - Unique identifier of ACL template resource. * `device_acl_status` - Status of ACL template provisioning process, where template was applied. One of `PROVISIONING`, `PROVISIONED`. * `device_details` - List of the devices where the ACL template is applied. The `device_details` block has below fields: * `uuid` - Device uuid. * `name` - Device name. * `acl_status` - Device ACL provisioning status where template was applied. One of `PROVISIONING`, `PROVISIONED`. ## Import[​](#import "Direct link to Import") This resource can be imported using an existing ID: ``` terraform import equinix_network_acl_template.example {existing_id} ```