# Sample Client Configurations Depending on the type of Equinix Precision Time service that you and your clients use, various PTP and NTP client configuration settings are required. ## PTP clients for Linux[​](#ptp-clients-for-linux "Direct link to PTP clients for Linux") Several PTP client implementations are available for Linux systems: * **ptp4l** * **ptpd** * **sfptpd** (requires supported Solarflare NICs) * **Domain Time II (Greyware)** * **Timebeat** ## NTP clients for Linux[​](#ntp-clients-for-linux "Direct link to NTP clients for Linux") Several NTP client implementations are available for Linux systems: * **ntpd** * **chronyd** * **ntpdate** The following examples demonstrate how to configure these clients with the Precision Time service. ## Equinix PTP Service Configurations[​](#equinix-ptp-service-configurations "Direct link to Equinix PTP Service Configurations") | Configuration Parameter | Equinix Provided Configurations | Tool Tip | | ----------------------- | ------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------- | | Domain | 30 | PTP domain is a network, or portion of a network, within which PTP operates. Within this network, all the clocks are in sync. | | Log Announce Interval | 1 | Logarithmic value that controls the rate of PTP Announce packets from the PTP time server. Default is 1 (1 packet every 2 seconds). | | Log Delayreq Interval | -4 | Logarithmic value that controls the rate of PTP DelayReq packets. Default is -4 (16 packets per second). | | Log Sync Interval | -4 | Logarithmic value that controls the rate of PTP Sync packets. Default is -4 (16 packets per second). | | Priority1 | 128 | Lower value indicates higher priority. | | Priority2 | 128 | Lower value indicates higher priority. | | Clock Class | 13 | Value that indicates the timescale which delivers UTC timestamps (set by default). | | Clock Accuracy | 23 | Value that indicates how accurate the source is to UTC time. Equinix Time sources are accurate up to 1µs from UTC (set by default). | Sample Configurations These sections contain sample configuration code for NTP and PTP clients. The values apply for default Precision Time Service settings. ## Sample Configuration – chronyd[​](#sample-configuration--chronyd "Direct link to Sample Configuration – chronyd") ``` server 192.168.1.21 iburst prefer server 192.168.1.22 iburst prefer driftfile /path/to/chrony/drift  makestep 1 3  rtcsync logdir /path/to/log/directory pidfile /path/to/chrony.pid log measurements statistics tracking ``` ## Sample Configuration – ntpd[​](#sample-configuration--ntpd "Direct link to Sample Configuration – ntpd") The Network Time Protocol daemon (ntpd) is the sample configuration used for NTP client devices. ``` driftfile /var/lib/ntp/drift restrict default nomodify notrap nopeer noquery restrict 127.0.0.1  restrict ::1 server 192.168.1.21 iburst true server 192.168.1.22 iburst true includefile /etc/ntp/crypto/pw keys /etc/ntp/keys disable monitor ``` ## Sample Configuration – ptpd[​](#sample-configuration--ptpd "Direct link to Sample Configuration – ptpd") Similarly, the Precision Time Protocol daemon (ptpd) maintains the system time to synchronize with time servers using PTP. ``` ptpengine:preset=slaveonly ptpengine:domain=30 ptpengine:sync_outlier_filter_enable=y ptpengine:delay_outlier_filter_enable=y ptpengine:sync_stat_filter_enable=y ptpengine:delay_stat_filter_enable=y ptpengine:log_announce_interval=1 ptpengine:log_sync_interval=-4 ptpengine:log_delayreq_interval=-4 ptpengine:calibration_delay=20 ptpengine:hardware_timestamping=y clock:allow_step_backwards=y clock:allow_step_backwards_hw=y global:log_status=y global:status_file=/path/to/ptp.status global:log_file=/path/to/ptp.log global:log_statistics=y global:statistics_log_interval=0 global:statistics_timestamp_format=both global:statistics_update_interval=1 global:statistics_file=/path/to/ptp.statistics global:lock_file=/path/to/ptp.pid ``` ## Sample Configuration – ptp4l[​](#sample-configuration--ptp4l "Direct link to Sample Configuration – ptp4l") The ptp4l tool is an implementation of PTP for Linux. ``` [global] twoStepFlag             1 slaveOnly               0 priority1               128 priority2               128 domainNumber            30 logAnnounceInterval     1 logSyncInterval         -4 logMinDelayReqInterval  -4 tx_timestamp_timeout    100 logging_level   6 ``` ## Sample Configuration – Arista 7050 Boundary Clock Mode Configuration[​](#sample-configuration--arista-7050-boundary-clock-mode-configuration "Direct link to Sample Configuration – Arista 7050 Boundary Clock Mode Configuration") This Arista 7050 tool is an implementation of IEEE 1588 PTP for boundary clock. If you are using Arista 7050 for boundary clock mode within the client network, this sample configuration code can be used. ``` << Enabling Global PTP configurations on the switch >> ptp mode boundary ptp domain 30 ptp source ip 172.16.100.9 << Slave Port Specific Configuration>> interface Ethernet47 description ECX::EQIX-EPT-SV5-CX-PRI-03 switchport mode trunk ptp enable ptp sync-message interval -4 ptp announce interval 0 ptp delay-req interval -4 ptp vlan 111 ``` ## Sample Configuration – Arista 7150 Boundary Clock Mode[​](#sample-configuration-arista-7150-boundary-clock-mode "Direct link to Sample Configuration – Arista 7150 Boundary Clock Mode") This is a similar tool, for Arista 7150. If you are using Arista 7150 for boundary clock mode within the client network, this sample configuration code can be used. ``` << Slave Port Specific Configuration>> interface Port-Channel13     switchport trunk allowed vlan 13    switchport mode trunk    ptp enable    ptp sync-message interval -4    ptp announce interval 1    ptp delay-req interval -4    ptp vlan 13   interface Ethernet44     description reserved_PTP    switchport trunk allowed vlan 13    switchport mode trunk    channel-group 13 mode active    ptp enable    ptp vlan 13 << Enabling Global PTP configurations on the switch >> ptp domain 30  ptp source ip 10.100.1.209 ptp priority1 129 ptp mode boundary ``` ## Sample Configuration – NTP over Anycast Solution using Network Edge[​](#sample-configuration--ntp-over-anycast-solution-using-network-edge "Direct link to Sample Configuration – NTP over Anycast Solution using Network Edge") See the [Anycast Use Case](https://docs.equinix.com/precision-time/ept-use-cases.md) for details about configuring Network Edge devices, including routers, firewalls, and NTP, over Anycast.