Skip to main content

Connecting to FastConnect

Use the Equinix Customer Portal or API to create the connection from your Fabric Port, Fabric Cloud Router, or Network Edge virtual device to Oracle Cloud.

Prerequisites​

  • A valid Oracle Cloud account with the ability to create and modify FastConnect circuits, including:

    • an Oracle Virtual Cloud Network instance.
    • A Dynamic Routing Gateway in the Oracle Console with an attached Virtual Cloud Network.
    • FastConnect Virtual Circuit(s). One or more FastConnect circuits must be created before creating the virtual connection in Equinix Fabric, because Oracle Cloud ID keys are required during the connection creation process.

    For more information, see Connection Set Up in the Oracle Console

  • A Fabric port, an A-side service token, a Fabric Cloud Router, or a Network Edge virtual device

  • To create connections in Fabric, you must have the Fabric Connections Manager role.

Creating a Connection​

  1. Log in to the Customer Portal > Fabric Dashboard.

  2. Use the Context Switcher and select the project under which you want to create the connection. For more information on projects, see Managing Projects.

  3. From the Connections menu, select Create Connection.

  4. In the A Service Provider card, click Connect to a Service Provider.

    Create a Connection to options with the A Service Provider card highlighted

  5. Search for Oracle. Select a Service Provider search for Oracle showing Oracle Cloud and Oracle OCI EU Sovereign cards

  6. On the Oracle Cloud card, click Select Service, then click Create Connection.

    Oracle service profiles including OCI FastConnect and Government Layer 2, each with Create Connection buttons

  7. Select connection type:

  • Redundant - Create a redundant pair of connections.
  • Primary - Create a single, primary connection.
  • Secondary - Create a single, secondary connection.
  1. Enter primary and secondary Oracle Cloud ID.

  2. From the Oracle Destination drop-down list, select the region and metro where your FastConnect circuits and your assets are located. Equinix Fabric Metros that have on-ramps to OCI Regions might be located in different cities. These are still considered to be local connections in Fabric.

    Quick Connect step 1, Enter Your OCI Information, with redundant connection type, OCID fields and destination region

  3. Click Next to configure your connection based on origin asset type: port, service token, cloud router, or virtual device.

Connecting from a Port​

  1. From the Origin Asset Type drop-down list, select Port.

  2. In the Primary Connection section:

    • Click + Select Primary Port, then select your primary connection port and click Select Port. Only primary ports are available for selection.

      Select Primary Port panel listing eligible ports with location, bandwidth, encapsulation and project columns

    • Enter the primary connection name.

    • Select a bandwidth.

    • Enter a VLAN ID (applicable to Dot1q ports) or a Customer VLAN Tag (C-tag) and a Service VLAN Tag (S-tag) (applicable to Qinq ports).

  3. In the Secondary Connection section:

    • Click + Select Secondary Port, then select your secondary connection port and click Select Port. Only secondary ports are available for selection.
    • Enter the secondary connection name.
    • Select a bandwidth.
    • Enter a VLAN ID (applicable to Dot1q ports) or a Customer VLAN Tag (C-tag) and a Service VLAN Tag (S-tag) (applicable to Qinq ports).
  4. Click Next.

Oracle Quick Connect step 2 with Port origin, selected primary port, connection name, bandwidth and VLAN ID

  1. On the Review Order and Additional Information page, review the information in the Connection Configuration sections.

  2. Use the Notifications field to provide the email addresses of the recipients to be notified about the connection's status. You can add up to 12 email addresses.

  3. (Optional) Enter or add order information in the Purchase Order section.

  4. Provide a customer reference identifier that will help you identify this order on your invoice.

  5. Click Show Order Summary to see order details and connection pricing information.

When you are ready, click Create Connection.

Connecting Using a Service Token​

  1. From the Origin Asset Type drop-down list, select Service Token.

  2. In the Primary Connection section:

    • Click + Enter Primary Service Token, provide the service token, then click Enter Service Token.

      Oracle Quick Connect step 2 with Service Token origin and Enter Primary Service Token panel open

    • Enter the primary connection name.

    • Select a bandwidth.

  3. In the Secondary Connection section:

    • Click + Enter Secondary Service Token, provide the service token, then click Enter Service Token.
    • Enter the secondary connection name.
    • Select a bandwidth.
  4. Click Next.

Oracle Quick Connect step 2 with Service Token origin, selected token, connection name, bandwidth and VLAN ID

  1. On the Review Order and Additional Information page, review the information in the Connection Configuration sections.

  2. Use the Notifications field to provide the email addresses of the recipients to be notified about the connection's status. You can add up to 12 email addresses.

  3. (Optional) Enter or add order information in the Purchase Order section.

  4. Provide a customer reference identifier that will help you identify this order on your invoice.

  5. Click Show Order Summary to see order details and connection pricing information.

When you are ready, click Create Connection.

Connecting from a Cloud Router​

  1. From the Origin Asset Type drop-down list, select Cloud Router.

  2. Click + Select Cloud Router, select a cloud router instance, then click Select Cloud Router.

    Select Cloud Router panel for Oracle Quick Connect listing eligible Ashburn cloud routers

  3. In the Primary Connection section:

    • Enter the primary connection name.
    • Select a bandwidth. The bandwidth value you select will also apply to the secondary connection. Even though FastConnect OCID keys can only be created with speeds of 1 Gbps or greater, Equinix Fabric allows you to create the Fabric connection with any of the standard bandwidth tiers that are available on Fabric. If the bandwidth speed for the connection is lower than the speed of the OCID key, Fabric will rate-limit traffic to the connection speed.
  4. If you are creating a Redundant Connection, enter your secondary connection name in the Secondary Connection section. The bandwidth value you selected for the primary connection is also applied to the secondary connection.

  5. (Optional) You can configure Border Gateway Protocol (BGP) routing details, or wait to configure BGP after the connection creation process is complete. Select Configure Routing Details and provide the required information. See Configure Routing Details for additional guidance.

    Configure Routing Details dialog with subnet version, IPv4 subnet source and BGP settings for primary connection

  6. Click Next.

    Oracle Quick Connect step 2 with Cloud Router origin, connection name, bandwidth and Configure Routing Details button

  7. On the Review Order and Additional Information page, review the information in the Connection Configuration sections.

  8. Use the Notifications field to provide the email addresses of the recipients to be notified about the connection's status. You can add up to 12 email addresses.

  9. (Optional) Enter or add order information in the Purchase Order section.

  10. Provide a customer reference identifier that will help you identify this order on your invoice.

  11. Click Show Order Summary to see order details and connection pricing information.

When you are ready, click Create Connection.

Connecting from a Virtual Device​

  1. Locate the Oracle Cloud card, click Select Service, then click Create Connection (Network Edge Device).

  2. In the Origin section, click Virtual Device. If the Virtual Device option is disabled, there are no virtual devices available in the selected project. Choose a different project, that has virtual devices assigned to it, or create a new virtual device in this project.

  3. Select a Metro.

  4. Choose virtual device type, select connection type, then select a virtual device instance.

  5. In the Destination section select a metro where you want to terminate your connection, then click Next.

    Select Locations step with Virtual Device origin in Ashburn and Oracle Cloud destination

  6. Enter a connection name.

  7. Enter a virtual circuit identifier.

  8. Select network interface on your virtual device.

  9. Enter a purchase order number.

  10. Select connection speed, then click Next.

    Connection Details step for Oracle with connection name, Virtual Circuit OCID, interface selection and speed options

  11. On the Review Order and Additional Information page, review the information in the Connection Configuration sections.

  12. Use the Notifications field to provide the email addresses of the recipients to be notified about the connection's status. You can add up to 12 email addresses.

  13. (Optional) Enter or add order information in the Purchase Order section.

  14. Provide a customer reference identifier that will help you identify this order on your invoice.

  15. Click Show Order Summary to see order details and connection pricing information.

When you are ready, click Create Connection.

Monitoring the Connection Status​

Once you have created the connection, it appears in your Connections Inventory where you can monitor its status.

equinixStatus parameter valuesproviderStatus attribute valuesDescription
PROVISIONINGPROVISIONINGConnection request has not been sent to Oracle yet.
PROVISIONEDPROVISIONINGConnection establishment in progress.
PROVISIONEDPROVISIONEDConnection established.

Configure Routing Details​

To complete your connection, you need to update the routing configuration. Note that Oracle’s ASN is 31898 which is needed when setting up the BGP peering session.

  • If you are connecting from a cloud router, configure the routing in the Customer Portal or API. Note that these configuration steps can be completed during the connection ordering process. If configured previously, you can skip this step.

  • If you are connecting from a virtual device, configure the routing on the virtual device according to the VNF's instructions and configuration settings.

  • If you are connecting from a port, configure the routing on your customer-provided equipment that is providing routing for your port.

If you created a redundant connection to Oracle Cloud, repeat the configuration on both connections.

To complete the configuration of the end-to-end connection, make the corresponding routing changes in Oracle Cloud.

Was this page helpful?