# Customer-Provided Secure Cabinet By request, Equinix can install your own cabinets as Secure Cabinets (instead of using the recommended Equinix-provided cabinets). You can either procure the cabinets yourself, or the [Equinix Smart Build](mailto:eisteam@equinix.com) team can help you order custom cabinets that fit your needs. > **Tip** > > For other Secure Cabinet solutions, see [Secure Cabinet Express](https://docs.equinix.com/colocation/secure-cabinet-express/colo-secure-cabinet-express.md) and [Secure Cabinet with kVA-Based Power](https://docs.equinix.com/colocation/secure-cabinets/colo-secure-cabinets-kva.md). ## Cabinet Requirements[​](#cabinet-requirements "Direct link to Cabinet Requirements") To ensure your cabinet will fit into a colocation area, it must satisfy the following requirements: * Closed 4-post cabinet with front and rear doors * Doors must have 3-digit-minimum combination locks * Maximum outside width = 34 inches or 865 mm * Maximum outside depth and height vary by IBX data center * Maximum arrival weight varies by IBX ## Capacity Feasibility Review (CFR)[​](#capacity-feasibility-review-cfr "Direct link to Capacity Feasibility Review (CFR)") A CFR approval is needed for all customer-provided cabinets. For the CFR, you are asked to provide your cabinet specifications and interconnection specs, such as: * Cabinet Make and Model – The manufacturer's name and the cabinet model number. Provide cabinet spec sheets and diagrams, if possible. Example: ![Drawing of a cabinet with labeled parts](https://docs.equinix.com/assets/images/colo-cpc-specs-example-922db5bacac72b6c552b238553668751.png) * Cabinet Depth – The outside depth of the cabinet, including the doors (specify unit of measure: inches or mm). * Cabinet Width – The outside width of the cabinet, including the side panels (specify unit of measure: inches or mm). > **Info** > > This is not the rail-to-rail width. * Cabinet Height – The outside height of the cabinet (specify unit of measure: inches or mm). * Cabinet Weight – Cabinet weight at arrival to the loading dock (specify unit of measure: pounds or kilograms). * Is Cabinet Racked and Stacked: * Yes = Cabinet is arriving with equipment inside of the cabinet. Weight provided must include cabinet weight + equipment weight. * No = Cabinet is arriving without equipment inside of the cabinet. Weight provided must only include cabinet weight. * Lock Type – combination lock, key card lock, or other. Combination Lock is the accepted standard, with a 3-digit minimum combination. * Lock Combination – Required at order fulfillment. This is the combo to be used by Equinix technicians for cabinet access. * Equinix Standard Patch Panel: * Yes = An Equinix standard patch panel will be used. * No = Another type of patch panel will be used. * Panel Size – The amount of patch panel space occupied. Use Rack Units (RU) as the unit of measure (where 1 RU = 1.75 inches of height). * Panel Port Capacity – The total port capacity of the panel (in pairs if fiber). * Panel Make and Model – The manufacturer's name and model number of the patch panel. * Panel Install Location – The RU number(s) within the cabinet where the patch panel will be installed. * Panel Connector Type – The connector type of the ports in the patch panel (such as SC, ST, FC, or LC connectors). * Cross Connect Access Location: * Front = Customer access to your side of the patch panel is at the front of the cabinet. * Back = Customer access to your side of the patch panel is at the back of the cabinet. * Rail Setback for Panel – The amount of space that the rails are to be set back from the edge. * AC/DC Power – Specify in kVA (kilo-volt-amperes). * Estimated Cross Connects – The total quantity of cross connects expected to terminate in the cabinet. * Cabinet Arrival Date > **Note** > > Equinix performs all installations of cabinets and power circuits.