# Modify Your Secure Cab Express Deployments Amendment orders are used to modify an existing cage or cabinet deployment. Use this procedure to increase the draw cap and/or add another cabinet to your Secure Cabinet Express deployment. If you want to modify a custom Secure Cab or Cage deployment, see [Modify Your Colocation Deployment](https://docs.equinix.com/colocation/managing-colo/colo-amendment-orders.md). ## Prerequisites[​](#prerequisites "Direct link to Prerequisites") Before you can submit a colocation order online, you need: * A billing account registered for the country where you want to order colocation assets or add-ons. * An Equinix Customer Portal account with the Colocation Ordering permission. This permission is located on the Colocation Ordering permission card in the Customer Portal. To view your current permissions or request more permissions, see [Permissions](https://docs.equinix.com/iam/roles-permissions/ecp-customer-permissions-request.md). ## Creating an Amendment Order[​](#creating-an-amendment-order "Direct link to Creating an Amendment Order") * Your amendment order will use the same billing account as the existing cabinet. * Due to limitations at some sites, you might not be permitted to increase the draw cap. * The ability to add a cabinet is based on the current availability of cabinets in the cage. Also, you can add cabinets only within the same cage as the initial cabinet deployment. * You can only add circuits of the same phase as the existing circuits. To modify your cabinet or cage installation: 1. Log in to the [Customer Portal](https://portal.equinix.com/). 2. From the *Orders and Tickets* menu, select **Colocation Assets**. > **New Customer Portal Experience** > > Equinix is upgrading its systems and the [user experience](https://docs.equinix.com/releases/experience-updates.md) in the Customer Portal. If your account has been onboarded, viewing and modifying your Secure Cabinet Express deployments under *Colocation Assets* is temporarily unavailable. You can still view your deployment assets in [*Install Base*](https://docs.equinix.com/colocation/managing-colo/ecp-install-base.md). Your Sales Representative can assist you in placing a change order. 3. Click on the billing agreement for the deployment you want to modify. ![Colocation Assets list with the Billing Agreement column highlighted](https://docs.equinix.com/assets/images/colo-assets-list-billing-agreement-fd39248dca9aa1773c69757166b7b254.png) > **Tip** > > You can search the list by cage number, cabinet number, cabinet asset number, or cabinet serial number. You can also filter by IBX location, billing account, and product type. 4. On the *Billing Agreement Details* screen, click **Edit**. ![Billing Agreement Details with Edit highlighted](https://docs.equinix.com/assets/images/colo-scede-billing-agreement-details-b38bf2e8034cc59353e6349d90a92bfe.png) The *Edit Configuration Details* screen is displayed. If the Edit button is disabled, it may be because: * Changes are already in progress for this deployment. * This deployment already has the maximum draw cap and maximum number of cabinets. ## Adding More Cabinets to Secure Cabinet Express[​](#adding-more-cabinets-to-secure-cabinet-express "Direct link to Adding More Cabinets to Secure Cabinet Express") To add more cabinets to your deployment: 1. In the *New Cabinets* section, select the new cabinet's dimensions. > **Tip** > > The number of spaces available in the cage is listed under the cabinet dimensions. This is the maximum number of new cabinets you can add to this order. > > Additional spaces may be available in other cages. To deploy cabinets in another cage, you must create a new order. 2. Click **+ Add Cabinet**. 3. Select your configuration options and click **Save**. Configuration Options: * Circuit configuration – Choose from one single phase circuit, two single phase circuits, or one three-phase circuit (each with redundant pair configuration) * Power distribution unit (PDU) – If you want to use your own PDUs instead of the recommended Equinix standard PDUs, deselect this option. Then after you submit your Secure Cabinet Express (SCE) order, [submit a Smart Hands order](https://docs.equinix.com/smart-hands/ordering/sh-how-to-order.md) to have your own PDUs installed in the cabinet. * Equinix Fabric Port – (under Additional Elements) If Equinix Fabric is available at the IBX, and if you have network port permissions, you can select this option. Equinix Fabric allows the creation of on-demand virtual connections to any customer or cloud service provider located in any IBX data center. 4. Select a new draw cap value. This is the aggregate power draw cap for your entire deployment (not per cabinet). 5. Click **Next**. 6. Under *Review Cabinet Location*, you will select a cabinet space within the IBX, using a diagram of the cabinets in the cage: ![Review Cabinet Location map](https://docs.equinix.com/assets/images/colo-scede-cab-location-6cc3399eee7b688697b85d493710c39e.png) * The default location selected for your new cabinet is shown in blue. * Other available cabinets are shown in white. * Cabinets that already belong to the selected billing account are shown in orange. * Unavailable cabinets are shown in gray. > **Tip** > > To move around in the diagram, click and drag it with your mouse. To zoom in or out, use your mouse wheel or click the +/- buttons. Click an available cabinet (in white), or accept the default selection (in blue). If your order contains another new cabinet, click the cabinet number under *Product*, then select an available cabinet in the cage. Repeat for all new cabinets in the order. 7. Click **Next**. > **Note** > > If a colocation space visualization diagram isn't available for the IBX, choose a cage/cabinet from the drop-down lists. ## Increasing the Draw Cap[​](#increasing-the-draw-cap "Direct link to Increasing the Draw Cap") To increase the draw cap without adding circuits or cabinets, select the desired amount of kVA in the *Draw Cap* section, then click **Next**. ![Draw Cap section with new draw cap options](https://docs.equinix.com/assets/images/colo-amend-order-draw-cap-cd88a38170a2e8eeef95bd01f2df2b1f.png) > **Info** > > This is the aggregate power draw cap for your entire deployment (not per cabinet). ## Review and Submit[​](#review-and-submit "Direct link to Review and Submit") 1. Under *Contact Information*, specify at least one Notification Contact, and optionally, a Technical Contact: | Contact Types | Description | | ---------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | | Technical Contact (optional) | For troubleshooting or clarification of the order. Technical contacts do not receive booking or completion notifications. Only one person can be selected as a Technical Contact. The Technical Contact and the Notification Contact can be the same person. | | Notification Contact | Contact(s) who will receive email notices about the status and pricing of the order. | 1. If you want to add another contact person to the order, click **Add from the Contacts Directory**. Select their name or use the search box, then click **Next**. (For Technical Contacts only) If the person is not listed in the directory, click **Add Unlisted Technical Contact**. Enter their contact info and click **Done**. (An unlisted contact cannot be selected as the Notification Contact.) 2. For each person, verify the contact information, and adjust the phone call availability and contact type settings. 2. Click *Review Order* and check all the information carefully. ![Review Order page](https://docs.equinix.com/assets/images/colo-scede-order-details-1d75a0c1737c5080c319984432581256.png) > **Info** > > Click *Contractual Terms* to review the price increase terms that may apply after your contract expires. 3. If the selected billing account requires a purchase order, click **+ Add Purchase Order Number**. Select a purchase order to associate with your order, then click **Next**. 4. Enter *Customer Reference* information. This field provides a place to enter your internal reference information, such as purchase order (PO) numbers, ticket numbers, or descriptive text. > **Tip** > > This information can be searched for on the *Orders and Tickets History* screen, and will also appear on any related invoices. 5. Click *Order Terms and Conditions* to review the contract terms. * If the order should be signed, select *eSignature* or *Wet Signature* and then click **Select Signature Option**. Specify the person in your organization who is authorized to approve the order, then click **Save**. The specified approver will receive a signature request via email. The order will not be processed until it is approved. * If the account does not require a signature, select *Click to accept* and then click **I Accept**. 6. Click **Submit Order**. ## Monitoring Your Order[​](#monitoring-your-order "Direct link to Monitoring Your Order") After you submit your order, you can monitor its status in the [Customer Portal](https://portal.equinix.com/). For details, see [Orders and Tickets History](https://docs.equinix.com/colocation/managing-orders/orders-tickets-history.md). ![Order activity timeline with Pending Approval status](https://docs.equinix.com/assets/images/colo-scede-order-status-7c6a4665652620aa9fadd98448fe3f8f.png)